- Company
- Products
- Services
- Documentations
- Technical notions
- Contacts
Low voltage capacitor banks
Medium voltage range capacitor banks
The flexible solution of automatic power factor controller
Control connection and disconnection of steps in order to maintain the target power factor. Detect critical operating conditions (also
in systems with significant presence of harmonics) and protect the power factor correction system. Connection on single and threephase lines, three-phase lines with neutral control and cogeneration systems with operation in 4 quadrants. For use with medium
voltage applications.
Conform to standards IEC 61010-1, IEC/EN 61000-6-2, IEC/EN 61000-6-3, UL508, CSA C22.2 no. 14
- setting the power factor setting range
- automatic identification of the Ti current direction
- fewer switching operations - balancing of steps with similar nominal power
- reactive power measurement for each installed step
- recording of number of connections per step
- alarm against overcurrents and overloads
- temperature rise alarm via the internal sensor
- undervoltage alarm
- analysis of harmonics and protection according to the level of THDU THDI
- fast CT programming function
- optical USB port on the front for controller programming, diagnostics and
downloading data
- backlit LCD screen for easy data reading, including when the lighting conditions
are poor (6 languages available)
- USB and Wi-Fi communication interface for connection to a computer,
smartphone or tablet
Can be equipped with special extension modules to extend their functionality
- 3 steps with possible extension to 6 steps
- takes 1 extension module
- 5 steps with possible extension to 8 steps
- takes 1 extension module
- 8 steps with possible extension to 14 steps
- takes 2 extension modules
Conforms to standards IEC 61010-1, IEC/EN 61000-6-2, IEC/EN 61000-6-3, UL508, CSA C22.2 no. 14
setting the power factor or phi tangent setting range
- automatic identification of the Ti current direction
- fewer switching operations
- balancing of steps with similar nominal power
- reactive power measurement for each installed step
- recording the number of connections per step
- alarm against overcurrents and overloads on all three phases
- temperature rise alarm via the internal sensor
- undervoltage alarm
- analysis of current and voltage harmonics
- analysis of current and voltage waveforms recorded for overload events
- CT fast programming function
- optical USB port on the front for controller programming, diagnostics and
downloading data
- backlit LCD screen for easy data reading, including when the lighting conditions are
poor (10 languages available)
- USB and Wi-Fi communication interface for connection to a computer, smartphone or
tablet
Can be equipped with special extension modules to extend its functionality
- 8 steps with possible extension to 18 steps maximum
- takes up to 4 extension modules